Replace Peer Review with “Peer Replication”

October 13, 2021 at 1:35 pm | | literature, science and the public, science community, scientific integrity

As I’ve posted before and many others have noted, there is a serious problem with lack of adequate replication in many fields of science. The current peer review process is a dreadful combination of being both very fallible and also a huge hurdle to communicating important science.

Instead of waiting for a few experts in the field to read and apply their stamp of approval to a manuscript, the real test of a paper should be the ability to reproduce its findings in the real world. (As Andy York has pointed out, the best test of a new method is not a peer reviewing your paper, but a peer actually using your technique.) But almost no published papers are subsequently replicated by independent labs, because there is very little incentive for anyone to spend time and resources testing an already published finding. That is precisely the opposite of how science should ideally operate.

Let’s Replace Traditional Peer Review with “Peer Replication”

Instead of sending out a manuscript to anonymous referees to read and review, preprints should be sent to other labs to actually replicate the findings. Once the key findings are replicated, the manuscript would be accepted and published.

(Of course, as many of us do with preprints, authors can solicit comments from colleagues and revise a manuscript based on that feedback. The difference is that editors would neither seek such feedback nor require revisions.)

Along with the original data, the results of the attempted replication would be presented, for example as a table that includes which reagents/techniques were identical. The more parameters that are different between the original experiment and the replication, the more robust the ultimate finding if the referees get similar results.

A purely hypothetical example of the findings after referees attempt to replicate. Of course in reality, my results would always have green checkmarks.

Incentives

What incentive would any professor have to volunteer their time (or their trainees’ time) to try to reproduce someone else’s experiment? Simple: credit. Traditional peer review requires a lot of time and effort to do well, but with zero reward except a warm fuzzy feeling (if that). For papers published after peer replication, the names of researchers who undertook the replication work will be included in the published paper (on a separate line). Unlike peer review, the referees will actually receive compensation for their work in the form of citations and another paper to include on their CV.

Why would authors be willing to have their precious findings put through the wringer of real-world replication? First and foremost, because most scientists value finding truth, and would love to show that their findings hold up even after rigorous testing. Secondly, the process should actually be more rewarding than traditional peer review, which puts a huge burden on the authors to perform additional experiments and defend their work against armchair reviewers. Peer replication turns the process on its head: the referees would do the work of defending the manuscript’s findings.

Feasible Experiments

There are serious impediments to actually reproducing a lot of findings that use seriously advanced scientific techniques or require long times or a lot of resources (e.g. mouse work). It will be the job of editors—in collaboration with the authors and referees—to determine the set of experiments that will be undertaken, balancing rigor and feasibility. Of course, this might leave some of the most complex experiments unreplicated, but then it would be up to the readers to decide for themselves how to judge the paper as a whole.

What if all the experiments in the paper are too complicated to replicate? Then you can submit to JOOT.

Ancillary Benefits

Peer replication transforms the adversarial process of peer review into a cooperation among colleagues to seek the truth. Another set of eyes and brains on an experiment could introduce additional controls or alternative experimental approaches that would bolster the original finding.

This approach also encourages sharing experimental procedures among labs in a manner that can foster future collaborations, inspire novel approaches, and train students and postdocs in a wider range of techniques. Too often, valuable hands-on knowledge is sequestered in individual labs; peer replication would offer an avenue to disseminate those skills.

Peer replication would reduce fraud. Often, the other authors on an ultimately retracted paper only later discover that their coworker fabricated data. It would be nearly impossible for a researcher to pass off fabricated data or manipulated images as real if other researchers actually attempt to reproduce the experimental results. 

Potential Problems

One serious problem with peer replication is the additional time it may take between submission and ultimate publication. On the other hand, it often takes many months to go through the traditional peer review process, and replicating experiments may not actually add any time in many cases. Still this could be mitigated by authors submitting segments of stories as they go. Instead of waiting until the entire manuscript is polished, authors or editors could start arranging replications while the manuscript is still in preparation. Ideally, there would even be a  journal-blind mechanism (like ReviewCommons) to arrange reproducing these piecewise findings.

Another problem is what to do when the replications fail. There would still need to be a judgement call as to whether the failed replication is essential to the manuscript and/or if the attempt at replication was adequately undertaken. Going a second round at attempting a replication may be warranted, but editors would have to be wary of just repeating until something works and then stopping. Pre-registering the replication plan could help with that. Also, including details of the failed replications in the published paper would be a must.

Finally, there would still be the problem of authors “shopping” their manuscript. If the replications fail and the manuscript is rejected, the authors could simply submit to another journal. I think the rejected papers would need to be archived in some fashion to maintain transparency and accountability. This would also allow some mechanism for the peer replicators to get credit for their efforts.

Summary of Roles:

  • Editor:
    • Screen submissions and reject manuscripts with obviously flawed science, experiments not worth replicating, essential controls missing, or seriously boring results.
    • Find appropriate referees.
    • With authors and referees, collaboratively decide which experiments the referees should attempt to replicate and how.
    • Ultimately conclude, in consultation with referees, whether the findings in the papers are sufficiently reproducible to warrant full publication.
  • Authors:
    • Write the manuscript, seek feedback (e.g. via bioRxiv), and make revisions before submitting to the journal.
    • Assist referees with experimental design, reagents, and even access to personnel or specialized equipment if necessary.
  • Referees:
    • Faithfully attempt to reproduce the experimental results core to the manuscript.
    • Optional: Perform any necessary additional experiments or controls to close any substantial flaws in the work.
    • Collate results.
  • Readers:
    • Read the published paper and decide for themselves if the evidence supports the claims, with the confidence that the key experiments have been independently replicated by another lab.
    • Cite reproducible science.

How to Get Started

While it would be great if a journal like eLife simply piloted a peer replication pathway, I don’t think we can wait for Big Publication to initiate the shift away from traditional peer review. Maybe the quickest route would be for an organization like Review Commons to organize a trial of this new approach. They could identify some good candidates from bioRxiv and, with the authors, recruit referees to undertake the replications. Then the entire package could be shopped to journals.

I suspect that once scientists see peer replication in print, it will be hard to take seriously papers vetted only by peer review. Better science will outcompete unreproduced findings.

(Thanks Arthur Charles-Orszag for the fruitful discussions!)

5 Comments »

RSS feed for comments on this post. TrackBack URI

  1. […] UPDATE: Also read my proposal to replace peer review with peer “replication.” […]

    Pingback by Everyday Scientist » avoiding bias by blinding — October 13, 2021 #

  2. This idea would not work for the Earth Sciences. A geologist may spend weeks to months making observations in the field and then write up a paper interpreting what they have seen. Should another geologist make a second map of the same area? And if the first scientist found rare fossils that the second one missed does that obviate the conclusions in the first paper? Especially when the reviewer could just ask for access to the fossils.

    Comment by Veri Similidude — August 6, 2023 #

  3. In cases where the experiment is too arduous to actually replicate, the peers could independently analyze the raw data. But I fully agree that some fields are more amenable to replication than others.

    Comment by sam — August 16, 2023 #

  4. […] could offer would be to arrange a convincing replication of the findings before publishing (peer replication), then just do away with the annoying peer review dog-and-pony show […]

    Pingback by Everyday Scientist » eLife’s new publishing policy — October 16, 2023 #

  5. I’m a nurse, not a scientist. Of course the public has little or no understanding of what peer review means. You are right, when it’s feasible, psid peer replication makes the most sense.
    Warm regards
    Jennie

    Comment by Jennie Williams — December 28, 2023 #

Leave a comment

thanks for the comment

Powered by WordPress, Theme Based on "Pool" by Borja Fernandez
Entries and comments feeds. Valid XHTML and CSS.
^Top^